View AV9107C-19_22231.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Integrated Circuit Systems, Inc.
AV9107C-19 AV9107C-20
Frequency Generator for Fibre Channel Systems
General Description
The AV9107C-19 and AV9107C-20 are high-speed clock generators designed to support fibre channel system requirements. The AV9107C-19 generates a single copy of the 106.25 MHz from a 17 MHz crystal. The AV9107C-20 provides a second copy of the 106.25 MHz clock with output skew less than 100ps. An exact frequency multiplying ratio ensures better than 100 ppm frequency accuracy using a standard AT crystal with external load capacitors (typically 33pF5% for an 18pF load crystal). Achieving 100 ppm over four years requires the crystal to have a 20 ppm initial accuracy, 30 ppm tempera-ture and 5 ppm/year aging coefficients.
Features
Generates one or two 106.25 MHz clocks from a 17 MHz crystal Less than 60ps one sigma jitter Less than 200ps absolute jitter Output skew less than 100ps on two channel version (-20) Rise/fall times less than 4ns driving 15pF On-chip loop filter components 3.0V-5.5V supply range 8-pin, 150-mil SOIC package
Applications
Specifically designed to support the high-speed clocking requirements of fibre channel systems
Block Diagram
AV 9107-19 20 RevC091897P
ICS reserves the right to make changes in the device data identified in this publication without further notice. ICS advises its customers to obtain the latest version of all device data to verify that any information being relied upon by the customer is current and accurate.
AV9107C-19 AV9107C-20
Pin Configurations
8-Pin SOIC
8-Pin SOIC
Functionality
OE 1 0 X1, X2 (MHz) 17.00 X FOUT (MHz) 106.25 Tristate
Pin Descriptions
PIN NUMBER 1 2 3 4 5 6 7 8 PIN NAME AVSS VSS X1 X2 OE VDD CLK2 AVDD VDD+AVDD CLK1 TYPE PWR PRW IN IN IN PWR OUT PWR PWR OUT Analog ground. Digital Ground. Crystal or clock input to device; nominally 17.0 MHz. Requires external load capacitors. Crystal drive output from device. Requires external load capacitors. Output enable causes all outputs to tristate when at a logic low level; has a pull-up. +3.3 or +5.0 volt supply (-19). 106.25 MHz clock output (-20). Analog power. (Must equal digital power voltage) (-19). Digital and analog power, +3.3 or +5.0 volt supply (-20). 106.25 MHz clock output. DESCRIPTION
2
AV9107C-19 AV9107C-20
Absolute Maximum Ratings
AVDD, VDD referenced to GND . . . . . . . . . . . . . . . 7V Operating temperature under bias. . . . . . . . . . . . . . . . 0C to +70C Storage temperature . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to +150C Voltage on I/O pins referenced to GND. . . . . . . . . . . GND -0.5V to VDD +0.5V Power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 Watts Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect product reliability.
Operating VDD = +4.5V to +5.5V; TA =0C to 70C unless otherwise stated
DC Characteristics PARAMETER Input Low Voltage Input High Voltage Input Low Current Input High Current Output Low Voltage1 Output High Voltage
1
Electrical Characteristics at 5.0V
SYMBOL VIL VIH IIL IIH VOL VOH IOL IOH IDD Rpu
TEST CONDITIONS
MIN 2.0
TYP -6.0 0.15 3.25 35.0 -50.0 22.0 380.0 0.8 0.7 1.5 1.0 49.0 30.0 -20.0 17.0 106.25 7.58 6.0 5.0
MAX 0.8 2.0 0.40 -35.0 45.0 700.0 1.4 1.2 2.0 1.5 55.0 60.0 200.0 100.0 19.0 120.0 18.0 13.0 -
UNITS V V A A V V mA mA mA k ohms ns ns ns ns % ps ps ps MHz MHz ms ms pF
VIN=0V (Pull-up input) VIN=VDD IOL=10mA IOH=-30mA VOL=0.8V VOH=2.0V Unloaded AC Characteristics
-16.0 -2.0 2.4 22.0 -
Output Low Current1 Output High Current 1 Supply Current Pull-up Resistor 1 Rise Time1 Fall Time
1
Tr1 Tf1 Tr2 Tf2
1
15pF load, 0.8 to 2.0V 15pF load, 2.0 to 0.8V 15pF load, 20% to 80% 15pF load, 80% to 20% 15pF load @ 1.4V 15pF load 15pF load 15pF load @ 1.4V (-20 only)
42.0 -200.0 -100.0 11.0 2.0 -
Rise Time1 Fall Time1 Duty Cycle Jitter, One Sigma1 Jitter, Absolute1 Output Skew,1 Clock 1 to 2 Input Frequency1 Output Frequency Power-up Time1 Transition Time
1 1
Dt Tj1s Tjab tsk1 Fi Fo Tpu Tft
1
8 to 66.6 MHz X1 (Pin 3) X2 (Pin 4)
-
Crystal Input Capacitance
Cinx
Note 1:
Parameter is guaranteed by design and characterization. Not 100% tested in production.
3
AV9107C-19 AV9107C-20
Electrical Characteristics at 3.3V
Operating VDD = +3.0V to +3.7V; TA =0C to 70C unless otherwise stated
DC Characteristics PARAMETER Input Low Voltage Input High Voltage Input Low Current Input High Current Output Low Voltage1 Output High Voltage1 Output Low Current Supply Current Pull-up Resistor 1 Rise Time Rise Time
1 1
SYMBOL VIL VIH IIL IIH VOL VOH IOL IOH IDD Rpu
TEST CONDITIONS
MIN 0.7VDD
TYP -2.5 0.05VDD 0.92VDD 22.0 -17.0 14.0 550.0 1.6 0.9 1.8 1.1 40.0 30.0 -25.0 17.0 106.25 7.58 6.0 5.0
MAX 0.20VDD 2.0 0.1VDD -10.0 30.0 900.0 3.5 1.5 2.5 2.5 50.0 80.0 200.0 100.0 19.0 120.0 18.0 13.0 -
UNITS V V A A V V mA mA mA k ohms ns ns ns ns % ps ps ps MHz MHz ms ms pF
VIN=0V (Pull-up input) VIN=VDD IOL=6mA IOH=-5mA VOL=0.2VDD VOH=0.7VDD Unloaded AC Characteristics
-7.0 -2.0 0.85VDD 15.0 -
Output High Current 1
Tr1 Tf1 Tr2 Tf2 Dt
1
15pF load, 0.8 to 2.0V 15pF load, 2.0 to 0.8V 15pF load, 20% to 80% 15pF load, 80% to 20% 15pF load @ 1.4V 15pF load 15pF load 15pF load @ 1.4V (-20 only)
30.0 -200.0 -100.0 11.0 2.0 -
Fall Time1
1
Fall Time1 Duty Cycle1 Jitter, One Sigma Jitter, Absolute1 Output Skew, Clock 1 to 2 Input Frequency1 Output Frequency1 Power-up Time
1 1
Tj1s Tjab tsk1 Fi Fo Tpu Tft Cinx
Transition Time1 Crystal Input Capacitance1
8 to 66.6 MHz X1 (Pin 3) X2 (Pin 4)
-
Note 1:
Parameter is guaranteed by design and characterization. Not 100% tested in production.
4
AV9107C-19 AV9107C-20
8-Pin Plastic SOIC Package
Ordering Information
Example:
AV9107C-19CS08 or AV9107C-20CS08
XXX XXXX-PPP M X#W
Lead Count & Package Width Package Type
S=SOIC Lead Count=1, 2 or 3 digits W=.3 SOIC or .6 DIP; None=Standard Width
Pattern Number (2 or 3 digit number for parts with ROM code patterns) Device Type (consists of 3 or 4 digit numbers) Prefix
ICS, AV=Standard Device
5
ICS reserves the right to make changes in the device data identified in this publication without further notice. ICS advises its customers to obtain the latest version of all device data to verify that any information being relied upon by the customer is current and accurate.

▲Up To Search▲

Price & Availability of AV9107C-19

	To Download AV9107C-19 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .